For years, researchers believed that the smaller the domain size in a ferroelectric crystal, the greater the piezoelectric properties of the material. However, recent findings by Penn State researchers have raised questions about this standard rule.

Ferroelectric materials possess spontaneous electric dipole moments that can be reversibly flipped by applying an electric field. Domains are areas in the ferroelectric crystal that have the dipole moments aligned in the same direction. Piezoelectricity is a material property where the crystal generates electrical charge under an applied mechanical force. This capability enables piezoelectrics to be used in electronics, sensors and actuators.

"So many devices in our daily life utilize the ability of a material to convert electrical signals to mechanical signals and vice versa," said Bo Wang, postdoctoral scholar in materials science and engineering. "In most of these applications, the piezoelectric material plays a key role. And the most advanced piezoelectric materials are the ferroelectric materials."

At a microscopic scale, ferroelectric materials consist of many domains, and these domains range in size from a few nanometers to as much as millimeters. Each domain consists of uniform or nearly uniform distribution of dipole moments, which occur when there is a separation of charge. The regions between adjacent domains are known as domain walls.

"The domain walls in ferroelectric crystals are interfaces with a very small thickness over which the dipole moments change their directions. It's well known in the research community of ferroelectric materials that these domain walls have a strong influence on piezoelectricity," Wang said. "There is a general belief in the community that the smaller the domain size or higher the domain wall density, the larger the piezoelectric coefficient."

However, the recent work by Wang and his co-workers, published in Advanced Materials, challenges this conventional wisdom.

"Our theory and computation demonstrated that such a conventional view is actually not often correct," Wang said.

The researchers found that the idea that smaller domains lead to higher piezoelectricity is based on very limited existing data without a solid theoretical foundation.

"Based on this conventional wisdom, many in the research community have tried to find ways to make all these domains smaller to enhance the piezoelectricity, and often when they see some improvement in the piezoelectric performance, one of the first things that comes to mind is maybe due to the smaller domains," said Long-Qing Chen, Hamer Professor of Materials Science and Engineering, professor of engineering science and mechanics, and professor of mathematics at Penn State. "Our work provides a theoretical foundation for correlating the piezoelectricity to crystal symmetry, crystal orientation, and domain configuration."

In that paper, they referred to findings by other researchers that an AC electric field can improve the piezoelectric response of the crystal by 20% to 40% compared with the crystal treated by a DC electric field. But the team discovered that inside the crystal during AC switching cycles, the domain sizes actually got bigger, not smaller as would be expected.

"We proposed a theoretical model of domain change under electric fields, we use computation to confirm it, and because of our simulation, we have shown that researchers in the future will have to look inside the crystal," Chen said. "The previous researchers showed that higher piezoelectric response is due to smaller domains, but they only looked at the surface. We showed computationally that actually, the domains became bigger with higher piezoelectricity, and that was found by examining under the crystal's surface."

According to Wang, this new understanding of the relationship between ferroelectric crystal domain size and piezoelectricity can provide guidance to improve piezoelectric performance of materials.

"We hope that this study allows people to rethink the design principles for piezoelectric materials, perhaps creating better piezoelectric materials in ways that were not thought possible before," Wang said. "This may enable better piezoelectrics made from lower-cost materials, or from materials that are more environmentally friendly."

Along with Wang and Chen, the other author on the study was Fei Li, a previous postdoctoral researcher in materials science and engineering at Penn State and now a full professor at Xi'an Jiaotong University in China.

Research Report: "Inverse Domain-Size Dependence of Piezoelectricity in Ferroelectric Crystals"

Related Links
Penn State
Computer Chip Architecture, Technology and Manufacture
Nano Technology News From SpaceMart.com

Tweet

Thanks for being here; We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Contributor $5 Billed Once credit card or paypal		SpaceDaily Monthly Supporter $5 Billed Monthly paypal only

Lithography-free carbon nanotube arrays: The simple way to grow an army of tiny superheroes
Melbourne, Australia (SPX) Nov 16, 2021
Carbon nanotubes are one of science's best kept secrets. These tiny, man-made materials boast extraordinary properties - they are the darkest material humans can create, they absorb light so well they can produce thermal energy, and they're able to mimic nature to help the body fight bacteria. Researchers in Australia and China have found a cheaper, easier way to organise large groups of carbon nanotubes, potentially opening up many new avenues for their use by more scientists around the world. ... read more