Only five centimetres of the Mars 'Mole' are still protruding above the planet's surface, and it is thought that it could have initially driven itself as much as 35 centimetres into the subsurface.

A small crater has formed around the shaft, with the result that the small penetrometer is experiencing insufficient friction against its exterior to be able to move deeper. Initial attempts to fill this 'Mole hole' using the arm of the InSight lander and its shovel have failed due to the strength of the surface crust.

Researchers from the German Aerospace Center (Deutsches Zentrum fur Luft- und Raumfahrt; DLR) and NASA's Jet Propulsion Laboratory (JPL) are now making a new attempt. They are planning to press the Mole sideways against the crater wall using the shovel of the robotic arm in order to give it enough traction and friction to burrow deeper into the surface.

"At a depth of 35 centimetres, the Mole left the guide springs in its casing and then began to precess due to the lack of soil friction, without advancing any further," explains Tilman Spohn from the DLR Institute of Planetary Research, and Principal Investigator of the Heat Flow and Physical Properties Package (HP3) experiment.

"We want to use lateral pressure provided by the robotic arm's scoop to create the friction that has been lacking." The Mole works like a self-hammering nail, so its recoil has to be absorbed using friction.

In June 2019, the researchers first removed the support structure for the HP3 experiment, exposing the Mars Mole to view. "It appears that a solid crust composed of approximately 10 centimetres of cohesive sand is overlying very loose sand," says Spohn, who explains this in his mission logbook.

In July and August 2019 attempts were made to 'close' the hole around the Mars mole using first the flat blade and then the tip of the scoop on the robotic arm. However, the crust turned out to be too hard.

The new strategy, described as 'pinning' by the team, will be executed on Mars over the coming weeks. The Mole will resume its hammering, aided by the lateral pressure of the arm.

However, this technique cannot be fully tested out on Earth in advance. JPL in California has set up a working mock-up of the InSight lander in a test field and installed a replica of DLR's HP3 experiment. While this allows the movements of the robotic arm to be practised, the scientists cannot fully replicate the soil without further information about its formation and composition.

"All we know about the soil is what we can see in the images InSight sends us," says Spohn.

The team of researchers is already considering alternative steps that may have to be taken in future. Another option is to use the scoop to scrape surface material into the hole, rather than trying to compress it. The robotic arm presents a challenge no matter what solution is selected.

It was designed to be as light and low in energy consumption as possible, and was only intended to lift the InSight experiments onto the Martian surface. It moves carefully and halts any movement that exceeds certain parameters. This can occur for many reasons, from a joint motor overvoltage to insufficient heating.

Unlike the robotic arm on NASA's Curiosity rover, it does not have any force sensors, so it cannot detect how much force it is exerting and cannot perform a pressing motion continuously. "We are asking the arm to punch above its weight," said Ashitey Trebi-Ollennu, the lead arm engineer at JPL. "It cannot press on the Mole the way a person can. This would be easier if it could, but that is just not the arm we have."

Related Links
InSight at DLR
Mars News and Information at MarsDaily.com
Lunar Dreams and more

Tweet

Thanks for being here; We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Contributor $5 Billed Once credit card or paypal		SpaceDaily Monthly Supporter $5 Billed Monthly paypal only

World first as kits designed to extract metals from the Moon and Mars blast off for space station tests
London, UK (SPX) Jul 30, 2019
Astronauts will test the devices on board the International Space Station, following the successful launch of the SpaceX Falcon 9 rocket last night (at 23:01 BST, Thursday 25 July) from NASA's Kennedy Space Centre at Cape Canaveral. Mining in space could open up a new frontier in space exploration by giving astronauts the resources they need for long periods in Space, whether on the Moon, Mars or asteroids. Scientists based at the University of Edinburgh have developed 18 matchbox-sized prot ... read more